How to Mount a Counter Top Over a Bar Back Cooler: A Step-by-Step Guide

If you're looking to create a functional and stylish bar area, mounting a countertop over a bar back cooler is a great way to maximize space and create a seamless look. However, this can be a challenging task that requires careful planning and execution.

In this article, we'll provide you with all the information you need to mount a countertop over a bar back cooler successfully. From sourcing the right equipment to cutting the cabinet to accommodate the cooler, we'll guide you through the process step-by-step.

Whether you're a DIY enthusiast or a professional contractor, this article will give you the knowledge and confidence to tackle this project and create a beautiful and functional bar area that you can be proud of.

Preparation

Before you begin mounting a countertop over your bar back cooler, you need to gather the necessary materials and take accurate measurements to ensure a proper fit.

Gather Materials

Here are the materials you will need:

• Countertop
• Bar back cooler
• Mounting brackets
• Screws
• Drill
• Screwdriver
• Tape measure

Measure the Bar Back Cooler

Measure the width and depth of your bar back cooler to ensure a proper fit for your countertop. Make sure to measure the cooler at its widest point, including any protrusions such as hinges or handles. Write down the measurements and use them to purchase a countertop that fits properly.

It's important to note that some bar back coolers have a lip or raised edge around the top. If your cooler has this feature, measure the height of the lip to ensure that your countertop will sit flush against it.

By gathering the necessary materials and taking accurate measurements, you'll be well-prepared to mount your countertop over your bar back cooler.

Installation

Cut the Countertop to Size

Before installing the countertop over the bar back cooler, you need to ensure that it is cut to the right size. Measure the dimensions of the cooler and add a few inches to the length and width to ensure that the countertop fits properly. Use a saw to cut the countertop to size, making sure that it is level and even.

Create Cutouts for the Cooler and Sink

Once the countertop is cut to size, create cutouts for the cooler and sink. Use a jigsaw to cut out the holes for the cooler and sink, following the manufacturer's instructions regarding ventilation. Make sure the cutouts are the right size and shape to fit the cooler and sink snugly.

Attach the Countertop to the Bar Back Cooler

Finally, attach the countertop to the bar back cooler. Apply a layer of adhesive to the top of the cooler, then carefully place the countertop on top, making sure it is centered and level. Secure the countertop to the cooler with screws, making sure they are evenly spaced and not too close to the edges.

Remember to follow the manufacturer's instructions when installing the countertop over the bar back cooler, and take the necessary safety precautions when working with saws and other tools.

Finishing Touches

Seal the Countertop

Before installing the sink and faucet, it's important to seal the countertop to prevent any water damage. Use a high-quality sealant that is compatible with the material of your countertop. Follow the manufacturer's instructions for application and drying time. Once the sealant is dry, use a damp cloth to wipe away any excess residue.

Install the Sink

When installing the sink, make sure to measure the size of the sink and the opening in the countertop to ensure a proper fit. Use a jigsaw to carefully cut out the opening for the sink. Apply a bead of silicone caulk around the edge of the sink and carefully lower it into the opening. Secure the sink in place with clips or screws, following the manufacturer's instructions.

Install the Faucet

Before installing the faucet, make sure to read the manufacturer's instructions carefully. Install the faucet according to the instructions, making sure to tighten all connections securely. Turn on the water supply and check for any leaks. If there are any leaks, tighten the connections or replace any damaged parts.

With these finishing touches, your bar back cooler countertop is now complete and ready to use. Enjoy your new bar area with friends and family!

Conclusion

Mounting a countertop over a bar back cooler can be a great way to maximize space in your bar area. However, it's important to ensure that you have the right type of cooler and that it's installed correctly to avoid any potential issues.

Before starting the installation process, make sure to measure the dimensions of your cooler and countertop to ensure a proper fit. Also, be sure to select a bar height model or models for your countertop.

During installation, use leveling feet and shims to ensure that the cooler is level and stable. Additionally, consider using an unfinished top for the cooler if it will fit underneath your countertop.

Remember, installing a free-standing wine or beverage cooler under a counter or in a cabinet can cause issues, so make sure to follow the manufacturer's instructions and recommendations.

By following these tips and guidelines, you can successfully mount a countertop over a bar back cooler and create a functional and stylish bar area in your home or business.

Looking to keep your bar's drinks perfectly chilled and easily accessible? The Restaurant Authority's collection of back bar coolers has got you covered! Our high-quality and energy-efficient coolers are the perfect addition to any bar or restaurant. Whether you're looking for a single-door cooler or a multi-door option, we have the perfect solution to fit your needs. Don't wait - check out our collection today and take your bar to the next level!